top of page
Search

Counter Stool vs Bar Stool: What Height Do You Need in Burlington?

info273345
Oct 27
5 min read

You sit at your kitchen island for breakfast, homework and late night chats, so the stool under you matters more than it seems. When the height is right, nobody thinks about it.


The counter stool vs bar stool choice comes down to one number: the height of the surface you sit at. Measure your island, breakfast bar or home bar first and the right stool type follows. This guide shows how to size stools for your Burlington kitchen and what to check before you buy.


How Do You Choose Between a Counter Stool and a Bar Stool?

Counter stools have seats about 24 to 26 inches high for counters near 34 to 36 inches. Bar stools have seats about 28 to 30 inches high for bars near 40 to 42 inches. Subtract 10 to 12 inches from your surface height to find your seat height.


A counter stool is a seat made for standard height counters and kitchen islands and a bar stool is a taller seat made for bar height surfaces such as home bars and pub style tables. The difference is seat height, not style. Homeowners across Burlington and the GTA choose between them based on the surface they have at home.


What Is the Difference Between a Counter Stool and a Bar Stool?

Backrests, swivels and finishes come on both types, so the surface decides which one fits.


Counter stool

Bar stool

Surface height

34 to 36 in (86 to 91 cm)

40 to 42 in (102 to 107 cm)

Seat height

24 to 26 in (61 to 66 cm)

28 to 30 in (71 to 76 cm)

Typical spot

Kitchen islands, breakfast counters

Home bars, pub style tables

At the other surface

Too low, so you reach up to the bar

Too tall, so knees press against the counter edge

Two further sizes are worth knowing. Table height chairs, with seats near 17 to 19 inches, suit standard dining tables. Extra tall stools, with seats around 33 to 34 inches, suit surfaces near 44 to 47 inches. Each product varies, so check the listed dimensions.


Counter Stool vs Bar Stool: Which One Fits My Kitchen Island?

Counter Stool vs Bar Stool infographic by Liz @ Home Burlington showing seat heights, counter measurements, spacing requirements, and stool selection tips.

An island built at standard counter height calls for counter stools. A raised ledge or bar calls for bar stools. On a two tier island, measure the raised ledge, not the main counter, since that is where the stools tuck in. If you want seating at both levels, decide whether the two stool types should read as a matched set or as two deliberate choices.


Open plan kitchens look calmer when connected counters share one stool height. Home bars and pub tables are usually built higher than a kitchen counter, so measure before you shop. Whether your home is a newer build in Alton Village or an older one in Aldershot, islands and bars are not always built to standard heights, so measure yours instead of assuming.


How Do I Measure for the Right Stool Height?

  1. Measure from the floor to the top of the surface.

  2. Subtract 10 to 12 inches. A 36 inch counter calls for a 24 to 26 inch seat and a 40 inch bar calls for a 28 to 30 inch seat.

  3. Measure from the floor to the underside of the surface, including any apron or overhang, to check knee room.

  4. Compare the result with the seat height in the product details.

  5. Measure in more than one spot with any rug in place, since floors and counters are rarely perfectly level.


Seat height is the distance from the floor to the top of the seat. Overall height includes the backrest, so it says little about fit. Product pages often list one overall height, such as the 35.5 inches shown for the Celine swivel counter stool, so ask the team for the seat height before you decide.


The result leaves roughly 10 inches between the seat and the underside of the surface. Much less presses your thighs against the edge and much more leaves you reaching up to eat or work.


How Much Space Does Each Stool Need?

Allow 26 to 30 inches of counter length per stool, measured centre to centre and leave 6 to 8 inches at each end. Divide your usable length by 26 to 30 inches and round down. A 60 inch counter, for example, gives two stools with room to spare.


Pulled out stools should not block walkways or appliance doors. Check the overhang too. A generous overhang gives knees room to tuck in, while a shallow one suits a slim stool with a footrest.


Which Stool Features Matter Most?

  • Backs. Backless stools tuck fully under the counter and keep sightlines open. Low back stools add some support. Full back stools suit long meals but often do not tuck under, so allow more room behind them.

  • Swivel. A swivel lets you turn toward the conversation without twisting your back.

  • Footrest. At bar height a footrest keeps legs supported, so check that it sits at a natural height.

  • Upholstery. Performance fabric and faux leather suit busy family kitchens.

  • Legs and floors. Metal legs need felt pads on hardwood. Swivel bases can drift on smooth floors and four leg designs sit steadier on tile with grout lines.


What Else Should I Check Before Buying?

Look under and around the surface for brackets, corbels, panel legs and toe kicks that can catch a stool or a knee. Then lay painter's tape where each stool base will sit and stack books to approximate the seat height. Finally, sit in the stool. Photos and numbers only go so far.


Where Can I Find Canadian Made Counter Stools in Burlington?

The Bar & Counter Stools collection at Liz @ Home in Burlington includes Canadian made counter stools such as Crimson, Aurora, Arabella, Celine and Amelie. Celine and Amelie are swivel styles with a memory return base that brings the seat back to centre. Bring your surface height, the height to the underside and your usable length and the team can help match a stool to your space.


Frequently Asked Questions


Can I use a bar stool at a kitchen counter?

Usually not comfortably. A bar stool seat sits higher than a standard counter allows, so your knees press against the underside of the surface. Match the stool type to your surface.


What stool height do I need for a 36 inch counter?

A seat height of about 24 to 26 inches suits a 36 inch counter. Measure your own counter before you buy, since not every island is built to standard height.


How many stools fit on my island?

Allow 26 to 30 inches of counter length per stool, centre to centre. Divide your usable length by that figure and round down.


Are adjustable stools worth it?

Adjustable stools use a gas lift to move between counter and bar height. They suit renters, changing spaces or households with a wide range of heights. Look for a stable base and a smooth lift.


Does Liz @ Home carry Canadian made counter stools?

Yes. The Bar & Counter Stools collection at Liz @ Home in Burlington includes several Canadian made counter stools, including swivel styles. Visit the showroom at 3443 Fairview Street to see them in person.


Ready to Find the Right Stools for Your Space?

Now you can match stool to surface with confidence. Browse the Bar & Counter Stools collection online or visit the Burlington showroom at 3443 Fairview Street with your measurements. Shoppers from Oakville, Hamilton and Mississauga are welcome to bring the same three numbers and the design team can help with layout questions.





 
 
 

Comments


Lets get social | @lizathomefurnishings

Services

Support

About Us​​

Liz @ Home believes in making affordable excellence a reality for every home, ensuring that your space is not just a place to live, but a place to love.

Where to find us​

3443 Fairview Street. Burlington, ON

(905) 631-6000

Hours:  M-Sat: 10-5:30PM | Sun: Closed |

Follow us on socials​

  • Facebook
  • Instagram
bottom of page